铝门的型材和玻璃款式有南北方之分。北方以铝材厚、款式沉稳为主要特色，最具代表性的是格条款式，而格条中最具特色的是唐格。南方以铝材造型多样、款式活泼为主要特色，最具代表性的就是花玻款式，款式有花格、冰雕、浅雕、晶贝等。
The profiles and glass styles of aluminum doors can be divided into north and south. The northern region is mainly characterized by thick aluminum and stable styles, with the most representative being the grid style, and the most distinctive among the grid styles is the Tangge. The southern region is mainly characterized by diverse aluminum shapes and lively styles, with the most representative being the flower glass style, which includes patterns, ice sculptures, shallow sculptures, and crystal shells.
折叠门
Folding door
折叠门主要由门框、门扇、传动部件、转臂部件、传动杆、定向装置等组成。该门型均可安装于室内和室外。每樘门有四个门扇，边门扇、中门扇各两扇。边门扇一边的边框与中门扇之间由铰链连接，边门扇另一边门梃上下端分别装有上下转轴，转轴与门洞两边门框上下转轴座相连接，边门梃将绕着一边梃旋转，同时带动中门扇一起旋转至90°，从而使门扇开启和关闭，电动时，上转轴端安装转臂部件、传动部件，门框上部中间安装传动部件和开门机；中门扇上设有定向装置。开门机运转后带动传动部件每部的两个齿轮旋转，与其齿合的两个齿条作直线运动，齿条的另一端与转臂连接，转臂作圆周运动，边门框即绕着一边梃旋转，电动开启门扇。两中门扇的中密缝均装有安全保护装置，关闭时遇有障碍物即回到全开启状态，安全可靠。
Folding doors mainly consist of door frames, door leaves, transmission components, rotating arm components, transmission rods, directional devices, etc. This door type can be installed both indoors and outdoors. Each door has four door leaves, with two side door leaves and two middle door leaves each. The frame on one side of the side door leaf is connected to the middle door leaf by a hinge. The upper and lower ends of the door stile on the other side of the side door leaf are respectively equipped with upper and lower rotating shafts, which are connected to the upper and lower rotating shaft seats of the door frames on both sides of the door opening. The side door stile will rotate around one side stile, while driving the middle door leaf to rotate to 90 ° together, so as to open and close the door leaf. When powered, the upper rotating shaft end is equipped with rotating arm components and transmission components, and the upper middle part of the door frame is equipped with transmission components and door opening machine; There is a directional device on the middle door leaf. After the operation of the door opening machine, it drives the two gears of each transmission component to rotate, and the two teeth that fit with it move in a straight line. The other end of the teeth is connected to the rotary arm, which moves in a circular motion. The side door frame rotates around one side of the stile, and the door leaf is electrically opened. The middle sealing joint of the two door leaves is equipped with safety protection devices, which can return to the fully open state when encountering obstacles when closing, ensuring safety and reliability.